1. CORROSION RESISTANCE
Most bearings failures today are caused by corrosion. A KMS Block & Bearing can be utilized in environments destructive to conventional units.

2. LUBE FREE:
Plastic or AISI 316 Stainless can run without lubrication at slow speeds and low loads.

3. HYGIENIC:
Bearing inserts are made from Plastic or AISI 316 Stainless and are naturally clean because they do not corrode or require lubrication in certain applications. Housings have smooth surfaces and a solid base that does not harbor objectionable dirt, mold or bacteria.

4. WASH DOWN:
They can be washed down without the penalty of having to re-lube to prevent rust.

5. WILL NOT CHIP OR PEEL:
With cast iron housings if the paint is scratched or chipped, it will rust. KMS housings are solid PBT Plastic.

6. REDUCED DOWNTIME:
Bearings and blocks with superior corrosion resistance will live longer requiring less frequent replacements.

7. NSF & FDA APPROVED MATERIALS:
AISI 316 Stainless, PBT and Acetal plastic are food and medical grade materials.

8. RUNS IN LIQUIDS:
Due to the materials used our bearings and housings can run in liquids.

9. CAN RUN DRY:
Plastic & AISI 316 Stainless do not require oil or grease for corrosion protection. Therefore, if the speed and load are low there is no need for lubrication.

10. LIGHTWEIGHT:
A KMS plastic housing fitted with a polymer race insert bearing is five (5) times lighter than conventional cast iron housing and steel bearing.