2064, Plastic Overhead Conveyor Wheel With 3/8" Bore x 2.25" OD
$5.17
- This is a non-stocking made to order bearing. Minimum quantity order will apply.
- This is a "GENERIC" bearing. It is an alternative to the OEM.
- DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request for quote.
- Ball retainer material, and color are based on availability.
TECHNICAL DESCRIPTION AND ADVANTAGES
This bearing wheel features the KMS double row construction that is cage type. It was originally designed for use in an overhead poultry conveyor. This bearing is constructed with Acetal plastic rings and cage and fitted with SS316 balls. MADE IN THE U.S.A.
- No lube
- Corrosion resistant
- Wash Down
- Can run in liquids
- Hostile Environments
- Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
- Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
| Weight | 0.1563 lbs |
|---|---|
| Inch Metric | Inch |
| ID (in) | 3/8 |
| OD (in) | 2.25 |
| Width (in) | Width of Outer Ring .71 in - Width of Inner Ring .85 in |
| Dynamic Load Capacity (LBS) | 78 |
| Static Load Capacity (LBS) | 52 |
| Standard Bearing Type | Acetal races with SS316 balls |
| Availability | Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability. |
