1257, 4 Point Contact 3" Bearing With Mounting Holes - 1 1/2" x 3" OD x 3/8"
$30.09
- DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request for quote.
- Ball retainer material, and color are based on availability.
TECHNICAL DESCRIPTION AND ADVANTAGES
This bearing application features the KMS "XR" series bearing construction that is a deep 4-point contact ball groove geometry. The design enables the bearing to handle simultaneous radial, axial, and moment loading while maintaining stiffness. As a bonus, the bearing is produced with minimal radial and axial play. The "XR" groove design will not lock up in the presence of off center loads. It was originally designed for a Mobile Satellite dish application. This bearing is constructed with Acetal plastic rings and cage and fitted with SS316 balls. This OD is as molded. MADE IN THE U.S.A.
- No-lube
- Light weight - low start up torque
- Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
- Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
| Weight | 0.1063 lbs |
|---|---|
| Inch Metric | Inch |
| ID (in) | 1 1/2 |
| OD (in) | 3 |
| Width (in) | 0.375 |
| Max. RPM No Load | 350 |
| Dynamic Load Capacity (LBS) | 92 |
| Static Load Capacity (LBS) | 61 |
| Standard Bearing Type | Acetal races with SS316 balls |
| Availability | Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability. |
