SIB204-3/4, Solid UHMW Plastic Insert Sleeve Bearing
$7.72
- DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request for quote.
- Minimum total invoice order is $50.00
TECHNICAL DESCRIPTION AND ADVANTAGES
KMS produces Insert Sleeve type bearings made from UHMW-PE plastic. They are CNC machined from an extruded rod for superior mechanical performance and longer life.
- No lube
- Hygienic
- Can run in liquids
- Non-magnetic
- Corrosion/Chemical resistant
- Abrasion resistant
- Wash down – No rust
- Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
- Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
| Weight | 0.0625 lbs |
|---|---|
| Block Size Reference |
|
| Inch Metric | both |
| ID (in) | 3/4 |
| OD (mm) | 47 |
| OD (in) | 1.85 |
| Width (in) | 0.591 |
| Total Width (IN) | 1.125 |
| Max. RPM No Load | 350 |
| Dynamic Load Capacity (LBS) | 275 |
| Static Load Capacity (LBS) | 325 |
| Standard Bearing Type | UHMW |
| Availability | Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability. |