TECHNICAL DESCRIPTION AND ADVANTAGES
KMS produces Insert Ball Bearings made from 316 stainless steel for raceways and balls. They feature a deep ball groove construction and a polymer cage. They are specifically designed to provide superior corrosion resistance when compared to conventional 440C stainless or steel insert bearings.
- No lube
- Low torque
- Can run in liquids
- Load and speed calculations are for reference only. KMS recommends testing in actual environment to be encountered.
- Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
- Ball retainer material, and color are based on availability.
Block Size Reference
Inch Metric both ID (in) 7/8 OD (mm) 52 OD (in) 2.047 Width (in) 0.709 Total Width (IN) 1.060 Max. RPM No Load 729 Dynamic Load Capacity (LBS) 276 Static Load Capacity (LBS) 183 Standard Bearing Type 316 Stainless races and balls fitted with Polymer cage Alternative Ball Materials Ceramic Alternative Raceway Materials
Availability Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability.