SSR18DR-6, Radial Ball Bearing, 316 Stainless Races and Balls, Double Row, Inch Size
$108.88
- DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request for quote.
- Minimum total invoice order is $50.00
- TECHNICAL DESCRIPTION AND ADVANTAGES
A KMS 316 Stainless ball bearing should only be used when a conventional 440 Stainless or a KMS Plastic ball bearing are unsuitable.
- Corrosion resistant
- Free turning
- No-lube
- Hygienic
- Can run in liquids
- Non-magnetic
- Can run without lube
- FDA & NSF approved materials
- High temperature models available with high temperature capable cage or without cage
- Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
- Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
- Ball retainer material and color are based on availability.
| Weight | 0.4375 ounces |
|---|---|
| Inch Metric | Inch |
| ID (in) | 1 1/8 |
| OD (in) | 2 1/8 |
| Width (in) | 0.75 |
| Row Type | Double |
| Flange | No |
| Max. RPM No Load | 583 |
| Dynamic Load Capacity (LBS) | 414 |
| Static Load Capacity (LBS) | 360 |
| Standard Bearing Type | 316 Stainless Raceways and balls fitted with Polymer Cage |
| Alternative Ball Materials |
|
| Availability | Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability. |