SSIB205-7/8, Insert Ball Bearing, 316 Stainless Races and balls
$110.97
- DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request for quote.
- Minimum total invoice order is $50.00
TECHNICAL DESCRIPTION AND ADVANTAGES
KMS produces Insert Ball Bearings made from 316 stainless steel for raceways and balls. They feature a deep ball groove construction and a polymer cage. They are specifically designed to provide superior corrosion resistance when compared to conventional 440C stainless or steel insert bearings.
- No lube
- Low torque
- Hygienic
- Can run in liquids
- Non-magnetic
- Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
- Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
- Ball retainer material, and color are based on availability.
| Weight | 0.0500 lbs |
|---|---|
| Block Size Reference |
|
| Inch Metric | both |
| ID (in) | 7/8 |
| OD (mm) | 52 |
| OD (in) | 2.047 |
| Width (in) | 0.709 |
| Total Width (IN) | 1.06 |
| Max. RPM No Load | 729 |
| Dynamic Load Capacity (LBS) | 276 |
| Static Load Capacity (LBS) | 183 |
| Standard Bearing Type | 316 Stainless races and balls fitted with Polymer cage |
| Alternative Ball Materials | Ceramic |
| Alternative Raceway Materials |
|
| Availability | Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability. |