XR10B-5/8B-6, Single Row, Inch Sizes, Acetal Plastic Ball Bearings fitted with SS316 Balls, 4 Point Contact "XR Series"

List Price: $0.00
OR
    TECHNICAL DESCRIPTION AND ADVANTAGES

These bearings are only available on a made-to-order basis. KMS offers the unique "XR" Series bearing style with deep groove, 4-point contact ball groove geometry. This design enables the bearing to handle simultaneous radial, axial and moment loading while maintaining stiffness. As a bonus, they also have minimal radial and axial play. The "XR" groove design will not lock up in the presence of off center loads. These are made to order and minimum quantities may apply.

  • No lube
  • Low torque
  • Hygienic
  • Can run in liquids
  • Non-magnetic
  • Load and speed calculations are for reference only. KMS recommends testing in actual environment to be encountered.
  • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
  • Ball retainer material, and color are based on availability.
Specifications

Additional Information

Inch Metric inch
ID (in) 5/8
OD (in) 1 3/8
Width (in) 7/16
Row Type single
Ball Type SS316 Balls
Max. RPM No Load 1069
Dynamic Load Capacity (LBS) 69
Static Load Capacity (LBS) 46
Standard Bearing Type Acetal races with SS316 Balls
Alternative Ball Materials
  • Acetal
  • Glass
  • Polypropylene
Alternative Raceway Materials
  • Kynar®
  • Peek
  • Polypropylene
  • Valox®
Availability Some bearings listed on our website may not be in inventory. Some may require a minimum order, and delivery could range from 3 to 6 weeks. Check with KMS for availability.