Custom Bearing Showcase

Specials are our Standard

See below for examples of custom made bearings and their applications.  Many of these bearings are available for purchase and can be modified to best fit your application.

Specials are our Standard

View Custom Showcase

Set Descending Direction

1-25 of 67

Page:
  1. 1
  2. 2
  3. 3
  1. 2167-PP, Kynar® PVDF With Glass Balls, 4 Point Contact Flange Bearing With Mounting Holes, 1-1/2" x 2.875" OD x 3/8" Wide
    List Price: $72.92

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This bearing features PVDF high performance plastic races and the KMS "XR" series bearing construction that is a deep 4-point contact ball groove geometry. The design enables the bearing to handle simultaneous radial, axial, and moment loading while maintaining stiffness. As a bonus, the bearing is produced with minimal radial and axial play. The "XR" groove design will not lock up in the presence of off center loads. It was originally designed for semiconductor, roller application. This bearing is constructed with PVDF plastic rings and cage and fitted with polypropylene balls. MADE IN THE U.S.A.

    • No-lube
    • Light weight - low start up torque
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  2. 2167-PTFE, Kynar® PVDF With PTFE Balls, 4 Point Contact Flange Bearing With Mounting Holes, 1-1/2" x 2.875" OD x 3/8" Wide
    List Price: $76.73

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This bearing features PVDF high performance plastic races and the KMS "XR" series bearing construction that is a deep 4-point contact ball groove geometry. The design enables the bearing to handle simultaneous radial, axial, and moment loading while maintaining stiffness. As a bonus, the bearing is produced with minimal radial and axial play. The "XR" groove design will not lock up in the presence of off center loads. It was originally designed for semiconductor, roller application. This bearing is constructed with PVDF plastic rings and cage and fitted with PTFE balls. MADE IN THE U.S.A.

    • No-lube
    • Light weight - low start up torque
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  3. 2061-C80, Polaris® Replacement C80 Turbine Bearing
    List Price: $4.10

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  4. 1254, Polaris® Replacement C60 Wheel Bearing - 5/8" x 1-1/8" x 7/16" (WIR), 1/4" (WOR)
    List Price: $4.10

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  5. 2045, Polaris® PART NUMBER 9-100-1108 Turbine Ball Bearing - 7/32" HEX x 7/8" x 9/32"
    List Price: $4.10

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a deep groove radial ball bearing construction.

    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  6. 1131, 2 Hole Flange, Integrated Hex Bore, Double Row Ball Bearing - 1/2" Hex x 1.265" x 0.918"
    List Price: $5.13

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a double row, deep groove radial ball bearing construction. The design enables the bearing to handle radial, and axial loading. As a bonus, the bearing is designed with the integration of a 2 hole flange for ease of mounting and a hex bore for a built in anti-rotational feature. It was originally designed for an under water pool cleaner application. The bearing was designed with Acetal races and cage and fitted with SS316 balls. Alternate materials can be substituted for non-magnetic/metallic capability at an additional cost. MADE IN THE U.S.A

    • Corrosion resistant
    • Light weight - low start up torque
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  7. 1714, Mars Pool Cleaner Plastic Wheel Bearing - W83259 - .560" X 1.322" X 1.315" (WIR), .610" (WOR)
    List Price: $0.00

    MADE IN THE U.S.A.

    • NOT FOR SALE
    • Click "Add to Quote Cart" to request more information.
    • This bearing is an OEM proprietary part and is shown for demonstration purposes only.
    • We can duplicate or design a bearing to your specifications.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  8. EO36, Arneson® Pool Sweep Bearing - .340" Hex Bore x 0.874" x 0.278"
    List Price: $2.72

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • Corrosion resistant
    • Light weight - low start up torque
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  9. 2199, GE® PART NUMBER 5177597 "AFTER MARKET" Cradle Wheel Bearing - .750" x 1.810" OD x 0.500"
    List Price: $25.86

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • No-lube
    • Light weight - low start up torque
    • Can run in liquids
    • Hostile Environments
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  10. 2211, GE® Part Number 5179918. Wheel Bearing and Bracket Assembly GE® Part Number 5177597 and Part Number 46-243167P1AD
    List Price: $42.90

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • No-lube
    • Light weight - low start up torque
    • Can run in liquids
    • Hostile Environments
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  11. 1955, GE® PART NUMBER 46-243494 MRI "AFTER MARKET" Patient Table Wheel Bearing - .750" x 1.750" x .550"
    List Price: $28.13

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • No-lube
    • Light weight - low start up torque
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  12. 2210, GE® PART NUMBER 46-243494 and GE® PART NUMBER 46-243167P1AD, Wheel Bearing and Bracket Assembly
    List Price: $45.17

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES
    • No-lube
    • Light weight - low start up torque
    • Can run in liquids
    • Hostile Environments
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  13. 2202, GE® PART NUMBER 46-243167P1AD, Wheel Bearing Bracket
    List Price: $17.04

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    MADE IN THE U.S.A.

    Learn More
  14. 1134, Phillips Picker MRI "AFTER MARKET" Patient Table Wheel Bearing - .500" x 1.629" OD x 1.705"
    List Price: $27.32

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a double row, deep groove radial ball bearing construction. The design features a UHMW type plastic as the wheel outer race. It is fitted with glass balls for a total non magnetic/metallic capability. SS316 balls may be substituted for a lower cost. It was originally designed for use in the Phillips Picker MRI Patient Table. MADE IN THE U.S.A

    • T-12-869 Philips couch wheel bearing
    • No-lube
    • Light weight - low start up torque
    • Can run in liquids
    • Hostile Environments
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  15. 1508NG, Oliver Design/Xyratex "AFTER MARKET" Double Row Integrated Flange Plastic Ball Bearing for Disk Cleaning Machine 1/2" x 1.125" x .803"
    List Price: $23.57

    • List price 1-99 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a double row, deep groove radial ball bearing construction. The design integrates the flange into the outer race of the bearing. This bearing is constructed with Acetal plastic rings and cages and fitted with SS316 balls. It was originally designed for aftermarket sales/replacement for use in the Oliver Design Xyratex disk cleaning machine. MADE IN THE U.S.A.

    • Corrosion resistant
    • Light weight - low start up torque
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  16. 1508I, Oliver Design/Xyratex "AFTER MARKET" Double Row Integrated Gear Plastic Ball Bearing for Disk Cleaning Machine 1/2" x 1.125" x .803"
    List Price: $24.79

    • List price 1-99 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a double row, deep groove radial ball bearing construction. The design integrates the gear into the outer race of the bearing. It was originally designed for aftermarket sales/replacement for use in the Oliver Design Xyratex disk cleaning machine. This bearing is constructed with Acetal plastic rings and cages and is fitted with SS316 balls. MADE IN THE U.S.A

    • Corrosion resistant
    • Light weight - low start up torque
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  17. 1509, Oliver Design/Xyratex "AFTER MARKET" Double Row Flange Plastic Ball Bearing With Groove for Disk Cleaning Machine 3/8" x 3/4" x 1"
    List Price: $22.71

    • List price 1-99 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a double row, deep groove radial ball bearing construction. The design integrates the flange into the outer race of the bearing. This bearing is constructed with Acetal plastic rings and cages and fitted with SS316 balls. It was originally designed for aftermarket sales/replacement for use in the Oliver Design Xyratex disk cleaning machine. MADE IN THE U.S.A.

    • Corrosion resistant
    • Light weight - low start up torque
    • Can run in liquids
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  18. 2075, Integrated Plastic Bearing for Medical Instrument - .623" X .828" X .746"
    List Price: $0.00

    MADE IN THE U.S.A.

    • NOT FOR SALE
    • Click "Add to Quote Cart” to request more information.
    • This bearing is an OEM proprietary part and is shown for demonstration purposes only.
    • We can duplicate or design a bearing to your specifications.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  19. 1856, Snap-In Plastic Guide Bearing - .300" X 0.500" X .156 (WOR)
    List Price: $0.00

    • NOT FOR SALE
    • Click "Add to Quote Cart” to request more information.
    • This bearing is an OEM proprietary part and is shown for demonstration purposes only.
    • We can duplicate or design a bearing to your specifications.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a deep groove radial ball bearing construction. The design enables the bearing to handle radial and minimal axial loading. As a bonus, the bearing is designed with an integrated self-mounting "snap in" inner race. It was originally designed for a soda vending machine application for beverage bottle dispensing. This bearing is constructed with acetal plastic races and fitted with SS316 balls. The bearing is mounted in the side wall of a moving carriage that carries a bottle from the shelf to the dispensing hole of the vending machine. This bearing can be used in any application that needs roller or wire guides to support a tray, rack or rails. A simple round hole is all that is required to mount this bearing. MADE IN THE U.S.A

    • Corrosion resistant
    • Light weight - low start up torque
    • Ease of mounting
    • Reduced parts
    • Maintenance free
    • Rotate freely
    • Cost Savings
    Learn More
  20. 1102RV2, Integrated, Self-Mounting, Shelf Support Flange Bearing
    List Price: $2.52

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This bearing features the KMS radial ball groove bearing construction that is a deep groove and cage type. This design enables the bearing to handle radial, and minimal axial loading. As a bonus, the bearing is designed with an integrated self mounting "snap in" inner race. The bearing was designed with acetal plastic for the races and cage and fitted with SS316 balls.

    This bearing was originally designed for a reach-in refrigerator application for beverage bottle and can dispensing. The bearing acts as a shelf support and allows the round tray to rotate to bring beverages from the back to the front. It is mounted in the side walls of the cooler by snap fitting into mounting slots. The design also includes tensions to center the tray and keep it in place. This bearing can be used in any application that needs roller guides or to support a tray, rack, rails. A simple rectangular hole is all that is required to mount this bearing. MADE IN THE U.S.A

    • Corrosion resistant
    • No-lube
    • Light weight - low start up torque
    • Ease of mounting
    • Reduced parts
    • Maintenance free
    • Cost savings
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  21. 1857, Snap-In Plastic V-Groove Plastic Bearing - .468" X 0.940" X .281" (WOR)
    List Price: $0.00

    • NOT FOR SALE
    • Click "Add to Quote Cart” to request more information.
    • This bearing is an OEM proprietary part and is shown for demonstration purposes only.
    • We can duplicate or design a bearing to your specifications.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a deep groove radial ball bearing construction. The design enables the bearing to handle radial and minimal axial loading. As a bonus, the bearing is designed with an integrated self-mounting "snap in" inner race. It was originally designed for a soda vending machine application for beverage bottle dispensing. This bearing is constructed with acetal plastic for the races and fitted with SS316 balls. The bearing is mounted in the side wall of a moving carriage that carries a bottle from the shelf to the dispensing hole of the vending machine. This bearing can be used in any application that needs roller or wire guides to support a tray, rack or rails. A simple round hole is all that is required to mount this bearing. MADE IN THE U.S.A

    • Corrosion resistant
    • Light weight - low start up torque
    • Ease of mounting
    • Reduced parts
    • Maintenance free
    • Rotate freely
    • Cost Savings
    Learn More
  22. 2121, Flow Rail Integrated Plastic Ball Bearing - .250" x 1.125" x 1.6" (WIR), .375" (WOR)
    List Price: $6.55

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a deep groove radial ball bearing construction with a cage for reduced friction. This design delivers the lightest weight & fastest spinning flow rail bearing available. The bearing was designed with acetal plastic races and cage and fitted with SS316 balls. MADE IN THE U.S.A.

    • Corrosion resistant
    • No lube
    • Hygienic
    • Maintenance free
    • Rotate freely
    • Non-marking
    • Free-turning
    • Wash down - No rusting
    • Lighter-weight than standard steel flow rail bearings
    • Wider contact surface - Better tracking
    • Tolerances +/- .020 unless noted
    • Cost Savings
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  23. 1428, High Temperature Plastic, Single Row, Integrated Gear Plastic Ball Bearing for Special Effects Lighting System - .394" x 2.083" x .750"
    List Price: $22.61

    • List price 1-24 pcs.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart” to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a 4-point contact, deep groove radial ball bearing construction. The design integrates the gear into the outer race of the bearing. It was originally designed for a special effects light system application and provides the benefits of a 4 point contact design while providing cost reductions through the integration of mounting holes and drive gear. It is constructed with Acetal plastic rings and cage and fitted with SS316 balls. MADE IN THE U.S.A

    • No lube
    • Light weight - low start up torque
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  24. 1273, Large Diameter Plastic Bearing With Mounting Holes - 3.405" x 5.721" OD x 1.542" (WOR), 1.137" (WIR)
    List Price: $0.00

    MADE IN THE U.S.A.

    • NOT FOR SALE
    • Click "Add to Quote Cart” to request more information.
    • This bearing is an OEM proprietary part and is shown for demonstration purposes only.
    • We can duplicate or design a bearing to your specifications.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More
  25. 1234, Bicycle Derailer Pulley - Integrated Plastic Race Ball Bearing - .236" x 1.485" x .236"
    List Price: $7.12

    • List price 1-24 pcs.
    • This is a "GENERIC" bearing. It is an alternative to the OEM.
    • MINIMUM ORDER: U.S.A. $25 - INTL. (Outside U.S.A.) $50
    • DISCOUNTS available for Distributors, OEM & higher quantities. Click "Add to Quote Cart" to request more information.
    • Ball retainer material, and color are based on availability.
      TECHNICAL DESCRIPTION AND ADVANTAGES

    This KMS bearing features a deep groove radial ball bearing construction and double polymer shields. The design integrates a bicycle rear derailer pulley with a KMS plastic race ball bearing. It can be easily maintained by washing out with water. This bearing is constructed with Acetal plastic rings and cage and fitted with SS316 balls. This bearing is an after market sales/replacement derailer bearing to improve performance. MADE IN THE U.S.A.

    • Made to order
    • Corrosion resistant
    • No-lube
    • Light weight - low start up torque
    • Wash Down
    • Load and speed calculations are for reference only. KMS recommends testing in the actual environment.
    • Information presented is believed to be accurate at the time of publication but it is subject to change without notice.
    Learn More

Set Descending Direction

1-25 of 67

Page:
  1. 1
  2. 2
  3. 3

Click here to send a message or call us at 1-888-000-9999

Plastic Vs Steel

Lubrication Free: Steel bearings require lubrication to reduce friction, dissipate heat and prevent corrosion. Due to the design of plastic ball bearings, there is no metal to metal contact, which results in less friction. Many times the liquids the bearings are running in can dissipate heat and act as the lubricant.


Read all the benefits of Plastic vs Steel Bearings